Vredestein Ultrac Satin - Premium Summer Tire for Passenger Cars
Unparalleled Safety and Comfort
Experience the ultimate in driving excellence with the Vredestein Ultrac Satin, a summer tire designed with cutting-edge technology and materials. Prioritizing safety and comfort, this tire features a unique traction-enhancing resin in the tread and innovative Z-sipes, ensuring superior handling and shorter braking distances.
Advanced Design for Optimal Performance
The Ultrac Satin boasts an asymmetric tread pattern and an optimized contact patch, providing outstanding control and responsive steering. Its design, crafted by the renowned Giugiaro, not only enhances performance but also delivers a distinctive and sporty appearance.
Energy-Efficient Innovations
With five highly efficient energy-saving enhancements across the tread, base, sidewall, carcass, and bead, the Vredestein Ultrac Satin reduces energy loss by 16%. This results in a low rolling resistance, classified as Class B, leading to reduced fuel consumption without compromising wet grip.
Key Benefits
- Enhanced driving dynamics and short braking distances on wet surfaces
- Optimal control and reliable steering response
- Low rolling resistance for improved fuel efficiency
- Unique design with a sporty aesthetic
Choose the Vredestein Ultrac Satin for a tire that combines safety, efficiency, and style, making every journey a pleasure.
Vredestein Ultrac Satin
The Vredestein Ultrac Satin is a summer tyre featuring a brand-new construction and compound. The focus during development was on safety and comfort. Superior handling and short braking distances are achieved through the use of a unique, traction-enhancing resin in the tread and Z-shaped sipes in the profile. The asymmetric profile and optimized footprint ensure excellent control when driving and a reliable steering response. Five highly energy-efficient compound improvements in the tread, tread base, sidewall, carcass and rim strip, as well as the optimised tyre geometry, reduce energy loss by 16%, providing a low rolling resistance (and therefore lower fuel consumption) without compromising the grip on a wet road.
Features
Traction-enhancing resin in the tread
Asymmetric profile and advanced oval footprint
Optimised tyre geometry, 5 highly energy-efficient compound improvements
Profile designed by Giugiaro
Benefits
Superior handling and short braking distances on wet surfaces
Optimal control and reliable steering response
Low rolling resistance (B label) for reduced fuel consumption
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.
C
B
71dB
