The Nankang ICE ACTIVA Ice-1 tire, with its dimension of 225/65 R17 106Q XL, is expertly designed for passenger cars facing harsh winter conditions. Its directional tread pattern and central rib construction significantly enhance straight-line stability and maneuverability on snow-covered roads. This ensures that your vehicle maintains a steady course, even in challenging weather.
Advanced Traction and Safety
Featuring innovative 3D sipes in the central area, this tire boosts grip on ice and snow, reinforcing the tread block's rigidity and enhancing straight-line driving stability. The rectangular 3D sipes on the shoulder further improve the profile's block strength, preventing deformation during driving or braking. This design ensures a safer driving experience by maintaining the tire's structural integrity.
Enhanced Friction and Traction
The tire's unique design includes irregular stud holes along the tread edge, which are strategically placed to increase friction and traction on icy roads, especially when snow chains are installed. This feature offers additional security and control when navigating slippery surfaces.
Optimized for Winter Conditions
Utilizing a special silica compound, the Nankang ICE ACTIVA Ice-1 tire improves handling on icy and snowy roads. This advanced formula enhances the tire's flexibility and grip, providing superior performance and confidence in winter driving scenarios.
Nankang Ice Activa Ice-1 is designed to reach high performance on snow and icy road conditions in Northern Europe.
With the design of centre rib and directional tread pattern that can strengthen the straight-direct stability and manoeuvrability on snowfield. With design of reticulate tread pattern groove that can strengthen the grip capability on snowfield.
Serrate 3D-SIPE at central part that can enhance the capability for ice-shovelling and snow-sweeping, as well as reinforce the rigidity of pattern block and stability of straight-direct.
Rectangular 3D-SIPE at shoulder area that can enhance the strength of pattern block and control the pattern block will not be over-deformed when wheeling or braking, hence to improve the safety of driving.
With design of irregular tack holes over the whole rim of tread pattern that can reinforce the friction and traction on ice road after installation of snow nails.
Optimized positions of stud holes over the tread pattern reinforce the friction and traction on icy road. Special silica formula is applied to improve the performance of the tyre when driving on icy or snowy roads.
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.
C
D
72dB
