A winter tyre designed for maximum mobility and safety–not just when it’s new, but for seasons to come.
Ultimate Snow & Ice Confidence
Excellent Winter Traction
Long Lasting Winter Tread
Quiet & Comfortable Ride
Great Fuel Efficiency
Winter grip made to last. The Michelin® X-Ice® Snow tyre offers shorter ice and snow stopping distances thanks to the exceptional grip provided by having two types of full-depth 3D sipes. This results in an increased claw effect on snow and ice, and long-lasting biting edges. Also featuring Flex-Ice 2.0 compound and MICHELIN® EverWinterGrip rubber inclusion technology for excellent ice braking, even after 3 winters.These inclusions will generate micro-roughness on the tyre surface for enhanced traction on snow and ice, giving extra grip in harsh conditions, winter after winter.
Improved hydroplaning and slush performance for mobility made to last The MICHELIN® X-Ice® Snow tyre offers better hydroplaning performance than its predecessors. The new aggressive winter tread design with increased void ratio and V-shaped tread pattern provides increased resistance to hydroplaning and enhanced snow, slush, and wet evacuation.
Excellence in longevity The MICHELIN® X-Ice® Snow tyre lasts up to one additional winter than the average of leading competitors. The new tread design, featuring interlocking 3D sipes, Flex-Ice 2.0 compound and an innovative Evergrip Technology, delivers long wear life by providing tread block rigidity and optimizing the tyre's contact with the road surface during acceleration, braking and cornering.
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.