Return to search results / Home / Summer tyres .. / 225 / 45 18 .. / ... / Hankook Ventus S1 Evo 3 K127B HRS
Add product to compare
Performance, safety and comfort are embodied in our sustainable tyres.
Ventus S1 evo3 is equipped with interlocking outside grooves to secure wet grip and prevent hydroplaning on slick surfaces. This reinforces its performance on wet roads and cornering in the rain, without compromising dry handling performance. * Technology Patent: 10-2018-0109541
Highly stiff outside shoulder
The outer blocks and shoulders of the tyre, where heavy loads and contact pressure are concentrated due to cornering, are expanded. The maximum steering grip force is secured by the dual action of the aramid hybrid reinforcement belt, which secures the flat contact surface under any conditions. This also ensures the dry handling is improved by 15%.
It presents improved performance in terms of hydroplaning and wet braking, by increasing the number of inner pitches (blocks) to secure the gaps for enhanced drainage.
The number of outer pitches is optimised to secure the steering grip performance required for dry cornering, this is designed to contribute to the reduction of pattern noise as well.
Aramid Hybrid Reinforcement Belt
Folded Belt Edge Tape
Application of High Strength Steel Belt Wire
Dual Layer Fiber Stiffener
Strong Jointless Bead Wire
HRS: Hankook Runflat System.
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher.
(Source: European Commission Impact Assessment
* when measured according to the test methods set out in Regulation (EU) 2020/740)
Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).*
*Source: wdk Economic Association of the German Rubber Industry eV
Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016.
The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016.
The classification "C" indicates that the specified limit value is exceeded.
Price per unit: %entry-formattedTotalPrice%