A 4x4 tyre with the strength to take on all terrain
Description:
The Wrangler AT/SA from Goodyear featuring Durawall™ allows you to drive with confidence on rough roads, thanks to the Durawall™ sidewall reinforcement that enhances cut resistance in the sidewalls. With Wrangler AT/SA, you just go where you want, under any road conditions. A 4x4 tire with the strength to take on all terrain.
Advanced puncture and cut resistance
Confident grip on wet roads
Improved mud traction for off-road driving
Quiet, comfortable ride
Advanced puncture and cut resistance. Tackle rough terrain with confidence, thanks to Goodyear’s SilentArmor Technology. The Wrangler AT/SA features two layers made with DuPont™ Kevlar®, a material five times stronger than steel. Sidewalls are reinforced to increase resistance to cuts and punctures.
Confident grip on wet roads. The high blade density tread features extra biting edges to improve grip on wet surfaces. The Wrangler AT/SA offers a braking distance on wet roads that is 15% shorter than its predecessor.*
Improved mud traction for off-road driving. Handle rough off-road environments with a tread that quickly evacuates mud, giving you hard-working traction where it counts most. The Wrangler AT/SA’s polymer blend enhances off-road performance.
Quiet, comfortable ride. Low noise with optimised block sequence and shifting for a comfortable ride.
Feature:
Deep staggered shoulder notches and traction ridges
High blade density tread
Optimised polymer blend
Benefits:
Improves tyre resistance to punctures in the tread
Reduces noise for a smooth and quite ride
Improves tyre resistance to punctures and cuts in the sidewall
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.
F
E
72dB
