Nankang Wintersaf WS-1: Superior Winter Performance for Passenger Cars
Exceptional Traction on Snowy Roads
The Nankang Wintersaf WS-1 is designed to tackle the harshest winter conditions with ease. Featuring an innovative zig-zag groove pattern and polygonal blocks, this tire offers an expanded contact area, ensuring enhanced control and stability on snow-covered roads.
Enhanced Stability and Drainage
The inner tread design incorporates straight grooves that significantly improve stability during straight-line driving. With a groove area ratio of 27.5%, the tire excels in water evacuation, reducing the risk of hydroplaning and maintaining optimal road contact.
Improved Handling on Icy Surfaces
A serrated 3D sipe pattern enhances the tread's rigidity, providing superior handling characteristics on icy roads. The grid-shaped tread design further enlarges the contact area, offering excellent initial control and responsiveness.
Advanced Tread Compound
The tread compound of the Wintersaf WS-1 includes hard natural core powder, which allows for easy penetration of icy surfaces. This feature ensures that the tire maintains its grip, offering drivers a safe and confident driving experience throughout the winter season.
Experience the ultimate in winter driving safety and performance with the Nankang Wintersaf WS-1, engineered for passenger cars that demand reliability and control in challenging weather conditions.
External tread pattern employs zig-zag groove and polygonal block design for greater contact patch and improved snow road controllability.
Internal tread pattern employs straight groove design for improved straight driving stability while the groove area ratio of 27.5% raises drainage performance.
Jagged 3D sipe pattern for better pattern rigidity and ice road handling
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.
D
C
72dB
