Maxxis Premitra 5: High Performance Tire for Ultimate Driving Comfort
Exceptional Handling and Stability
Experience the perfect blend of comfort and performance with the Maxxis Premitra 5, a high-performance tire designed for passenger cars. Its unique outer shoulder block profile ensures excellent straight-line driving and superior cornering capabilities, making every journey smooth and controlled.
Advanced Water Dispersion
Equipped with four circumferential grooves and thin inner grooves, the Premitra 5 significantly enhances water dispersion, providing exceptional resistance to aquaplaning. This feature ensures your safety and stability even on wet roads, allowing you to drive with confidence in any weather condition.
Reduced Noise and Vibration
The innovative arc-profile on the shoulder blocks, combined with a multi-space tread design, minimizes noise and vibrations. This results in a quieter and more comfortable ride, allowing you to enjoy every mile without unnecessary distractions.
Enhanced Rolling Resistance
The tire's multi-space tread design not only reduces noise but also improves rolling resistance. This leads to better fuel efficiency, making the Maxxis Premitra 5 an economical choice for those who value both performance and cost-effectiveness.
Optimal High-Speed Performance
Central grooves enhance straight-line stability at high speeds, offering optimal driving behavior. Whether you're cruising down the highway or navigating city streets, the Premitra 5 ensures a stable and reliable performance, making it the ideal choice for drivers seeking both comfort and high performance.
The Premitra HP5 delivers outstanding performance in wet and dry weather conditions due to its world leading technology and design. Its full-silica rubber compound has been developed to reduce excessive heat generation, as well as improve wear performance and durability. The multiple variable pitch tread and lateral groove design has been developed to reduce vibration noise, lower rolling resistance and enhance wet handling to minimise the chances of hydroplaning. High-speed stability and handling has been improved due to high strength steel belts, guaranteeing an outstanding sport performance.
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.
D
A
70dB
