The AZ850 is a performance tire designed for the modern SUV, Cross Over and Sport Truck to take advantage of the increased power and handling ability of these vehicles.
The AZ850 asymmetric tread design features different inside and outside tire contours to achieve optimum balance across the tread face. This design evenly distributes the pressure of the contact surface to enhance comfort and handling.
The AZ850 is also available as a Run Flat model. The RFT sizes are engineered to allow for up to 50 miles of driving at 50 MPH (80km at 80 KPH) with zero air pressure. The Run Flat AZ850 offers an affordable option to the overpriced original equipment tires found on many performance SUV, such as the BMW X5, without compromising on performance or quality. The AZ850 RFT also offers an enhanced safety option to those drivers who are looking for the security of a run flat tire, even if it was not original on their vehicle.
The unique compound and tread design of the AZ850 were specifically engineered for the contemporary performance utility vehicle. The result is a rubber compound that helps reduce rolling resistance, which, in turn, allows the tire to run cooler at high speed. High-tensile steel belts and jointless nylon bands increase stability at high speeds and provide secure braking, handling and durability.
AZ850 Design Features:
The large outer tread block is designed with a rigid and strengthened block to maintain integrity under hard cornering.
The finely sliced inner tread block is designed to reduce noise and allow dispersion of water.
Four main grooves designed to increase the wet grip.
Center rib improves straight-line driving; Also enhancing directional stability.
Oblique lateral grooves increase water dispersion capacity in order to avoid .
The Tire Labeling Ordinance specifies the information requirements on fuel efficiency, wet grip and external rolling noise from tires. In addition, reference is made to the winter properties of the product.
The EU 1222/2009 regulation that has been in force since November 1st, 2012 has been revised and will be replaced by regulation EU 2020/740 from May 1st, 2021; From this point on, new requirements apply. The rating classes for fuel efficiency, wet grip and exterior noise have been changed and the layout of the EU label has been adjusted. The manufacturer's product data sheets stored in the EU database can be downloaded via a QR code integrated into the label. Information on snow grip and ice grip is also newly included for tires that meet these criteria.
The following tires are exempt from the regulation: - tires that are designed exclusively for installation on vehicles that were first registered before October 1, 1990 - retreaded tires (until a corresponding extension of EU VO 2020/740 has taken place) - professional off - Road tires - Racing tires - Tires with additional devices to improve traction, eg studded tires - T-type emergency tires - Tires with a permissible speed below 80 km/h - Tires for rims with a nominal diameter ≤ 254 mm or ≥ 635 mm
The criteria and evaluation classes at a glance
fuel efficiency
The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driving style of the driver. The measured rolling resistance (rolling resistance coefficient) of the tire is divided into classes A (highest efficiency) to E (lowest efficiency).
If a vehicle is completely equipped with class A tires, a consumption reduction of up to 7.5%* is possible compared to class E tyres. In the case of commercial vehicles, it can even be higher. (Source: European Commission Impact Assessment * when measured according to the test methods set out in Regulation (EU) 2020/740)
Please note: Fuel consumption depends to a large extent on your own driving style and can be significantly reduced by driving in an environmentally friendly manner. Tire pressure should be checked regularly to improve fuel efficiency.
wet grip
Wet grip is divided into classes A (shortest braking distance) - E (longest braking distance).
If a car is equipped with class A tires, compared to class E tires, a braking distance of up to 18 m can be reduced when braking from 80 km/h (on a road surface with average grip).* *Source: wdk Economic Association of the German Rubber Industry eV
Please note: Traffic safety depends to a large extent on your own driving style. The stopping distances must always be observed. Tire pressure should be checked regularly to improve wet grip.
External rolling noise
The noise emitted by a tire affects the overall volume of the vehicle and affects not only your own driving comfort, but also the noise pollution of the environment. In the EU tire label, the external rolling noise is divided into 3 classes from A (lowest rolling noise) - C (highest rolling noise), measured in decibels (dB) and compared with the European noise emission limit values for external tire rolling noise.
A The pictogram with the classification "A" indicates that the tire's external rolling noise is more than 3 dB below the EU limit value in force until 2016. B The "B" classification means that the tyre's external rolling noise is up to 3 dB below or equal to the EU limit value in force until 2016. C The classification "C" indicates that the specified limit value is exceeded.
C
C
74dB
